(1) operation essentials :(1) before starting, carefully check whether the circuit, gas pipe and air valve leak, and oil each lubrication part. ; (2) Install the web paper correctly on the shaftless support according to the paper specifications specified in the production notice; (3) Through the steam to start the main motor operation, until the steam pressure rises to 8kPa (tile roll temperature of more than 160℃) paper feeding; (4) Release the rubber valve, slowly and uniformly rotate the main motor speed control button, and press the pressure key to make a single-sided corrugated board into the bridge; (5) After production, reset the gluing roller, close the heat source and air valve, and adjust the main motor to low speed; (6) clean the rubber roller, remove the paper scraps and carbonized rubber slag on each roller; (7) when the tile roller temperature drops to not hot, stop for a long time, the roller surface should be coated with anti-rust oil; (8) often check whether the valve and joint work normally, whether the instrument is sensitive, whether the indication is correct; (9) Keep equipment and site clean and fill in equipment operation records.